Pages

Friday, June 29

Next week's construction-related closures

I-10 – Kerrville

  • Monday, July 2 until Friday, July 6. 9 a.m. until 5 p.m. Alternating westbound main lanes between FM 1338 (Goat Creek Road) to SH 16 will be closed for guardrail and asphalt repair work.

I-10 – Boerne

  • Sunday, July 1 until Friday, July 6. 9 p.m. until 5 a.m. The right westbound main lane between ½ mile west of Bus 87 to Scenic Loop will be closed for concrete traffic barrier work.

I-35 – North San Antonio

  • Saturday, June 30 until Monday, July 2. 3 a.m. until 5 a.m. All northbound lanes between George Beach and I-410 south will be closed for illumination work. Traffic will exit at the new Rittiman exit ramp and travel on the frontage road and enter the highway at Binz-Engleman/George Beach entrance ramp. The left lane on southbound between I-410 south and Walzem Road will also be closed for median work.

I-410 – West San Antonio

  • Current and continuous until December 2018. Turnarounds, both directions, at Marbach Road. The turnarounds will remain closed while crews construct the new Marbach overpass bridge. Traffic will use the signalized intersection.
  • Current and continuous until December 2018. Northbound exit ramp to Marbach. The ramp will remain closed while crews reconstruct the road. Traffic will exit US Hwy 90 and continue along the frontage road to reach its destination.
  • Friday, June 29 until Saturday, June 30. 9 p.m. until 12 noon. All southbound main lanes between Ingram Road and Military Drive will be closed restriping to final configuration. Traffic will need to exit Culebra Road; travel through the intersection and enter highway at SH 151.
  • Sunday, July 1 until Friday, July 6. 8 p.m. until 5 a.m. All southbound main lanes between Marbach Road and US 90 will be closed for bridge deck work. Traffic will be detoured to I-410 southbound frontage road and take the next entrance ramp.
  • Sunday, July 1 until Friday, July 20. 9 p.m. until 5 a.m. All northbound main lanes between SH 151 and Culebra Road will be closed for asphalt overlay work. Traffic will need to exit SH 151; travel through the intersection and enter highway at Culebra Road.

SH 151 – West San Antonio

  • Sunday, July 1 until Monday, July 2. 9 p.m. until 5 a.m. All westbound main lanes between I-410 and Hunt Lane will be closed for bridge joint work. Traffic will need to exit I-410; travel through intersection and enter highway at Hunt Lane.

I-10 – West San Antonio

  • Friday, June 29 until Monday, July 2. 9 p.m. until 5 a.m. All lanes in both directions closed between Camp Bullis Road and Boerne Stage Road for beam work at Dominion Drive. The underpass at Dominion Drive and entrance ramps will also be closed. Westbound traffic will detour at Boerne Stage Road and eastbound traffic will detour at Camp Bullis.

I-10 – East San Antonio

  • Friday, June 29 until Monday, July 2. 9 p.m. until 5 a.m. All westbound main lanes between Exit 587 ramp to the I-10 entrance ramp west of Loop 1604 will be closed for existing approach slab repair work. Traffic will need to exit at Exit 587 and continue past Loop 1604 and enter the highway and the next entrance.

U.S. Hwy 281 – Far North San Antonio

  • Current until Friday, July 6. 9 p.m. until 5 a.m. Northbound frontage road between east and westbound Loop 1604 frontage road. The right lane will be closed for bridge, traffic signal and pothole work.
  • Current until Friday, July 6. 9 p.m. until 5 a.m. Northbound main lanes between Sonterra Boulevard exit ramp and entrance ramp. The right and center lane will be closed for bridge work.
  • Sunday, July 1 until Tuesday, July 3. 9 p.m. until 5 a.m. Alternating southbound lanes between Redland Road and Sonterra Boulevard exit ramp. Alternating lanes will be closed for restriping. Traffic will need to exit at Donella Drive.
  • Sunday, July 1 until Tuesday, July 3. 9 p.m. until 5 a.m. Alternating northbound lanes between Donella Drive entrance ramp to Sonterra Boulevard entrance ramp will be closed. Traffic will need to use the Donella Drive exit.
  • Sunday, July 1 until Tuesday, July 3. 9 p.m. until 5 a.m. Alternating lanes on both directions of Encino Rio east of US 281 will be closed for restriping and setting barrier rail work.
  • Thursday, July 5 until Friday, July 6. 9 p.m. until 5 a.m. Northbound full frontage road closure between Loop 1604 and Sonterra Boulevard exit ramp for bridge work. Traffic will need to use southbound frontage road; use Donella Drive turnaround and take Donella Drive entrance ramp.
  • Thursday, July 5 until Friday, July 6. 9 p.m. until 5 a.m. Alternating northbound main lanes between Donella Drive entrance ramp and Sonterra Boulevard entrance ramp will be closed for restriping. The Sonterra Boulevard exit ramp will also be closed. Traffic will need to use the Donella Drive exit.
  • Thursday, July 5 until Friday, July 6. 9 p.m. until 5 a.m. Alternating southbound main lanes between Redland Road and Sonterra Boulevard exit ramp will be closed for restriping. The Sonterra Boulevard exit ramp will also be closed. Traffic will need to use the Donella Drive exit.
  • Thursday, July 5 until Friday, July 6. 9 p.m. until 5 a.m. Alternating lanes on both directions of Encino Rio east of US 281 will be closed for restriping and setting barrier rail work.

Other roads – Boerne

  • Monday, July 2 until Tuesday, July 31. 9 a.m. until 4 p.m. Alternating main lanes closed in both directions of SH 46 between I-10 to the Kendall/Bandera County Line for guardrail work.

Other roads – Converse

  • Current and continuous until Friday, August 24. FM 78 at FM 1516. The right turn lane will close while crews do road work. Oversized vehicles will use FM 3502 to reach its destination.

Other roads – Helotes

  • Current and continuous until Monday, July 2. Riggs Road, both directions, at FM 1560. All lanes are restricted while crews reconstruct the intersection. The turn radius is tight and trucks with trailers should not use this intersection.
  • Current and continuous until Friday, September 28. Northbound Bandera Road at FM 1560. The left turn lane will close while crews do road work. No left turns will be permitted. Traffic will continue to the next intersection and turn around to reach its destination. Cross traffic from Circle A is also blocked.